Unlock Huawei e1732 Idea Net Setter + Unlock Software & Firmware Download


If you are searching for how to unlock huawei e1732 data card of idea net setter then you are at correct place. Thousands of users are using huawei e1732 idea net setter for accessing internet and almost all of them have tried to unlock the net setter so that they can use any SIM card in it to get internet connectivity. Yesterday i have unlocked 2 modems of e1732 Idea Net Setter and i can say that the solution which i will be sharing is 100% tested by me and working perfectly.
Unlock Huawei e1732 Idea Net Setter
Note: Huawei e1732 Idea Net Setter is using idea net setter e173du-1 hardware (see following screen shot)
huawei idea net setter e173du-1
If you have any doubt or facing any problem at any moment, put your comment after this post. So without wasting time refer below step by step guide with screen shots for you, which will help you to unlock your e1732 modem.
Prerequisites (Things which will be required as a raw material):
  1. An internet connection (in case net setter data card require device drive then it can download them from internet directly).
  2. Disable Antivirus if you have any (I am using Eset Nod32 which i have disabled during unlock procedure)
  3. You must have to download two files, 1) Download CDMA Workshop Full version and 2) Huawei e1732 downgrade firmware. (7zip will be needed to unzip the cdma workshop files)

    1. CDMA Workshop (Download It From This Link)
    2. E1732 Downgrader (Download It From This Link)
  4. Make sure that your modem is detected in your PC and you should know the PORT number on which your modem is connected.
  5. Insert any SIM in modem Excepting idea (don’t insert idea SIM).

Steps to Unlock Huawei e1732 Idea Net Setter

  1. Disable Antivirus till the time unlocking is finished, because the crack of “CDMA Workshop v2.7” will be automatically deleted by your antivirus software.
  2. Insert Idea Net Setter modem in you PC/Laptop.
  3. Go to My Computer >> Properties >> Device Manager >> Ports (COM & LPT)  >> HUAWEI Mobile Connect – 3G Application Interface (COM[X]), here X is the port number appear in your system. Note down the com port number in which your huawei e1732 idea net setter is connected.
  4. Now Open “CDMA Workshop v2.7.0.exe“.
    • Connect CDMA Workshop
    • Under the “Main” tab Select Port number(“COM Settings (AT mode)”) which you have get in step 3 and click on Connect button.
    • Click on Read button.
    • Read Flash
    • Go to “Security” tab > Type “000000” in the blank box under SPC. Click on SPC button >> Send button with Default (nv_read) as SPC.
    • This image has been resized. Click this bar to view the full image. The original image is sized 632x422px.
      Send SPC as Default
    • Now Go to “Memory” tab and in NV Items section Click on Read button. A Conform box will appear, just click OK and you will see a NV Items Backup box. In the box “Last NV Item” type “9999”  and Click OK. Save the file by giving a file name you like (i.e. E1732Unlockfile etc.)
    • Successfully NV Items Created
      New NV item value
      Write NV Items
    • Once the buffer reach 100% your file is saved successfully, now click OK on Information box.
    • Minimize the “CDMA Workshop v2.7.0.exe” application.
    • Now Open E1732 Downgrader application and run it. Accept the license agreement and click Next >> Wait for a few seconds until the search for your modem finishes.
      (Don’t mark “Auto remove the device after update” check box) and click next and Start.
    • Downgrade Huawei E173
    • At the end of  Downloading Programs… you will get an “Update Failure!” error message box, just go ahead and click OK and then Finish.
    • Again Maximize “CDMA Workshop v2.7.0.exe” application.
    • Go to “Main” tab and Click on Finish button – Unplug your idea net setter now.
    • Again Plugin your idea net setter modem in the computer and again find the Port number from device manager (as discussed in step 3)
    • Now go to “CDMA Workshop v2.7.0.exe” and select the Port that you noted from your device manager
    • Go to “Main” tab and click on “Connect”.
    • Go to “Memory” tab and click on NV Items >> Write button. On confirm box click “OK” >> “Open” dialog box will appear. Choose the file that you saved before and wait till the buffer reaches to “100%” a “Information” dialog box appears with a success message.
    • Click “OK”  and go to “Main” tab >> Disconnect.
    • Now close “CDMA Workshop v2.7.0” >> A “Confirm” dialogue box will appear >> Click “NO”
    • Close everything and now enable your Antivirus.That’s it! Your Idea Netsetter E1732 is unlocked successfully.
  •  APN Setting for some Networks in India:
BSNL 3G :
APN name = bsnlnet
Access number = 99#
Airtel :
APN name = airtelgprs.com
Access number = 99#
Reliance :
APN name = rcomnet
Access number = 99#
Tata Docomo :
APN name = TATA.DOCOMO.INTERNET
Access number = 99#
Idea :
APN name = internet
Access number = 99#
Aircel :
APN name = aircelgprs
Access number = 991#
MTNL 3G :
APN name for Postpaid = mtnl3g
APN name for Prepaid = pps3g
Access number = 99#
Possible incoming Search Terms for Unlock Huawei e1732 Idea Net Setter + Unlock Software and Firmware Download:



  • huawei e1732 unlock firmware
  • huawei e1732 unlock
  • huawei e1732 modem unlocker
  • huawei e1732 software
  • huawei e1732 driver
  • huawei e1732 dashboard
  • huawei e1732 firmware download
  • huawei e1732 idea firmware
  • huawei e1732 idea net setter unlock
  • huawei e1732 idea unlock
  • how to unlock idea net setter e1732
  • how to unlock idea net setter e173du-1
  • how to unlock idea net setter e173
  • how to unlock e1732 idea netsetter
  • how to unlock e1732 modem
  • how to unlock huawei e1732
  • how to unlock idea e1732
  • idea net setter e1732 unlock software

  • Huawei E1732 Specifications

    UMTS 2100MHz
    GSM/GPRS/EDGE(850/900/1800/1900MHz)
    Support:
    HSDPA data transfer speed up to 7.2Mbps
    HSDPA date transfer speed up to 5.6Mbps.
    Support PC voice (optional) and SMS services
    Support data statistics
    Micro SD card reader (up to 4GB)
    Plug & Play
    Support Windows 2000/XP/Vista and Mac Operating Systems
    Weight: 30g
    Size Dimensions: Normal
    Let me know if you get any trouble during this process. Best of Luck!

    Author : NiKE

    Iam Artical Writer from India, I love to Write latest Tech Related, Reviews & SEO/Blogger Articals !
    Google+ @NiKE
    Like Us on Facebook @iTechSpecial


    iTechSpecial.com

    72 comments:

    kamlesh sahu said...

    file gayab hai khol ke dekh.dusra address de.......

    Anonymous said...

    For tatadocomo sim mobile partner shows connection terminated while im connecting. I unlocked my device but i can't use my docomo sim in to it pls help

    NiKE iTechSpecial said...

    connect directly by clicking on network icon and selecting the avilable network,

    ashish gupta said...

    I have cracked netsetter but it is showing error while changing net work.......it shows FAILED TO APPLY NEW SETTINGS

    ashish gupta said...

    I have unlocked it....but i am getting error when i am restteing netwrok........FAILED TO APPLY NEW SETTINGS

    Anonymous said...

    there is no file in the link
    if u can publish how to unlock lw272

    Anonymous said...

    i got updatesuccessfull i don't get update failure and also again maximize cdma workshop at time i don't get finish in main tab

    Anonymous said...

    Hey.. when i run the firmware update wizard, it is not detecting the inserted data card and is showing an error instead... i am not being able to proceed with the further steps.
    Kindly help

    Anonymous said...

    i cant change my profile from idea!!pls help..

    Amit Sarkar said...

    anyone successfully executed this method......plz confirm if it's working or not.....am gonna try this method to unlock my e1732 any risk of loosing my dongle??

    Anonymous said...

    Hi, I executed the above process for my Idea Net Setter on 30-05-2013 successfully. I could connect to my Airtel 3G connection using Idea Net Setter exactly as described in above process. This is 100% tested process.

    Nayananshu Nath said...

    oooooooooooooo super ,... just awesome.... Just I Like It

    Anonymous said...

    i have cracked it....i m using airtel 3g in it..bt will ne one tell me y m unable to use bsnl3g sim in in?

    hilvon said...

    1000000000000000% working. but i cant edit APN Setting

    hilvon said...

    ADMIN---i have unlcoked it on my pc, but it will work on other pc, i mean i hv to do dat al steps again on other pc. please reply?

    Yahoo said...

    I did all steps to unlock idea netsetter E1732 But I am not able to use other sim card. I think this trick is not working.

    Suman Hassan said...
    This comment has been removed by the author.
    Suman Hassan said...

    I have unlocked it successfully, working for all sims. but 3G sim cards are also detected as 2G. Can you please help ???

    RAVI KUMAR NK said...

    @Suman Hassan , goto Tools - Options - Network - Network type to WCDMA only

    then u can access 3G network

    RAVI KUMAR NK said...

    @hilvon, if u unlocked once , then it will work on all Pc's

    RAVI KUMAR NK said...
    This comment has been removed by the author.
    RAVI KUMAR NK said...

    @Anonymous

    files updated

    rd said...

    I have use this software to unlock my netsetter e1732 but after that it has not shown network signal even original shim, please help

    ITz NiKE said...

    @rd

    just repaet the steps and install mobile partner properly

    jay said...

    not working trick it only open cdma workshop and read nv and change last to 9999 and save this as u wish.. thn downgrade open and update after that imei correpted but its okay now open cdma workshop and write this backup its permanet solution now open this in mobile partneer to use ..


    try this it working

    rd said...

    just done it, my netsetter is unlocked , i can use any sim.

    chinni said...

    i have inserted idea sim and i have done all the process did it causes any problem to modem.

    Anonymous said...

    i unlocked sauccesfully but i cant make new profile for vodafone pls help

    Anonymous said...

    it is showing successful but it is not working with other sims.

    arush said...

    Accha Tarika Hai Mere frnds

    Swapnil said...

    I can't send spc as i an getting error as "failed, phone does not answer. tried changing port but same error. plz help."

    Anonymous said...

    Hi I also unlocked but can't modify network profile settings without setting network this trick useless.could you tell me how to modify network profile clearly??. This would help others also who suffers same issue. Thanks in advance.

    Anonymous said...

    when i register it show message "please check the network availability"

    ashish gupta said...

    @NiKE iTechSpecial
    it is not showing any network

    ashish gupta said...

    admin -- i am getting the same problem....even when i am using moble partner...i think there is some issue with network

    Vaibhav Kumar said...

    when i m selecting the port 26..then it is said that this port is only available at a registered version.so tell me how i will register this cdma workshop.

    ITz NiKE said...

    @ashish gupta

    change the dashboar to mobilebroad band

    ITz NiKE said...

    @Vaibhav Kumar

    its full version, dnt know why u r getting that error

    Anonymous said...

    I HAVE A ONE, WHICH IS ALREADY UNLOCKED TO MOBILEBROADBAND.

    HOW TO RUN IT IN LINUX, I DON'T FIND ANY LINUX SUPPORTED FILES IN IT.

    neal said...

    i will get massage "connection get terminated by remote desktop computer", after trying to connect any sin card except Idea & how to change the APN for any card

    burhan said...

    can u help me to unlock idea netsetter E303D

    vaibhav vadak said...

    Hi sir Myself Vaibhav.I am Trying To unlock my idea netsetter huwei e 173du1.it is connected but it cant read the information...kindly help me...

    Ashish Parekh said...

    Hi, I have a unlocked e1732 dongle but when i started it with BSNL SIM the idea net setter application ask me for registration of my email id and alternate mobile no. so they can send me password for the same, i tried to register as they wish but REGISTRATION FAILURE message appears, please help me to short it out. Thanx and waiting for your replay.......

    Bishu Mondal said...

    change the dashboar to mobilebroad band

    Bishu Mondal said...

    change the dashboar to mobilebroad band

    Thefseer's Photography said...

    i did everything that you showed me. now my net setter is not working anymore

    anoop s said...

    unlocking is successful but cannot change the profile management.default
    pofile is idea and the 'new'tab is not working.so the apn and acess name canot be changed

    Mithun Jha said...

    dear i want to unlouck idea net sutter model no E1730u-1
    please suggest

    Anonymous said...

    i have no idea about the opening of cdma. please help .

    nipoy raj said...

    unlocking successfully but i face a problem to detect another sim. So please provide the right solution.

    jack syrus said...

    when i open downgrader it faild now what can i do

    jack syrus said...

    when i open firmware after searching it says 'the data card cant found error code:3

    rps@musafir said...

    my firm ware version is 11.126.29.02.356 please provide details to unlock this E173Du-1 idea 3g netsetter

    mdrasheed rasheed said...

    if i enter aircel sim after unlocking modem it is saying [you can't connect before register an available network] what i should do now pzllllllll help





    mdrasheed rasheed said...

    if i enter airtel its connecting if i enter aircel its saying like this [you can't connect before register an available network] help me pzl pzl pzl pzl pzllllllllllllllllllllllll
    plzplzplzplzplzplzplzplzplzplzplzplzplzplzplzplzplzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

    NiKE said...

    @mdrasheed rasheed

    That means, the AIrcel network signal is not good at your area, try fixing antena to ur modem and goto to settings in mobile broadband/partner dashboard, and goto to network , and search for network and register manually ,
    that would work

    Anonymous said...

    i cant connect to net
    it is showing "connection terminated"

    pl's help

    NiKE said...

    @Anonymous

    What is the excat problem you are getting?
    I think its your sim problem, just make sure you have good network and internet connection

    Anonymous said...

    is there any way to change profile.?the new,delete,edit,etc.options are not working?

    NiKE said...

    @Anonymous
    Just get updated with new dashboard, so then you can edit :)
    search dashboard in our website and download

    Hokikur Rahman said...

    i unlocked my idea netsetter and insert a aircel sim. But i shows a message of you canot connect before register an avaiable network.Is there any setting to be changed in mobile partner software.plz advice.

    Anonymous said...

    Hi Admin, while running E1732 Firmware download ,after start facing an error - " data card can't be found. Error code 3.one of the following reasons may cause the error (a).The datacard not properly not connected to PC
    (b) Other program is using the datacard. (c) You do not have authority of the administrator "
    Even i had run it as administrator.. Please help..

    Anonymous said...

    i followed all the steps that you mentions but its not working,and i have one dought.whether i can use the net-setter with idea software or what software is suits for the unlocked net-setter plzz replay\

    Anonymous said...

    how to edit the profile..i didn't get you what you maean by dashboard

    Anonymous said...

    Good Job Bro..It worked..i have tested it..Thx!

    ashish gupta said...

    Nike iTech @ I cannot connnect .....it doesnot shows network...no sim is working ...please help

    Anonymous said...

    i m not able to set up new profile
    the new profile option is not highlited

    Subhakant Rout said...

    no its not working ..it asking for please register your details.

    Anonymous said...

    Brother Thank you very very very very very very very very very very Much.............
    for this guide, Rowshan.

    Anonymous said...

    i have com37 and software have options till com25 only so what can i do

    pawan rawat said...

    gud work bro thanks

    Priya Dharshini said...

    new news

    Post a Comment

    Twitter Delicious Facebook Digg Stumbleupon Favorites More